How to maintain the telescopic bollards after installation?

After installation, the care and maintenance of the telescopic bollard is the key to ensure its long-term stable operation and extend its service life. Here are some specific care and maintenance suggestions:

1. Daily cleaning and inspection

Regular cleaning: Use a soft damp cloth to wipe the surface of the telescopic bollard to remove dust and dirt. Avoid using detergents containing corrosive chemicals to avoid damaging the coating on the surface of the bollard.

Clean the environment: Make sure there is no accumulation of debris around the telescopic bollards to avoid affecting the normal operation of the telescopic bollards. At the same time, keep the drainage system unobstructed to prevent water accumulation from damaging the telescopic bollards.

Observe the bollard: Regularly check whether the bollard is deformed, damaged or corroded. If problems are found, they should be repaired or replaced in time.

2. Transmission system and control system maintenance.

Check the transmission system: Regularly check whether the transmission chain, gears and other components are operating normally, whether they are loose or worn. If there are any problems, they should be adjusted or replaced in time.

Check the control system: Check whether the control system's lines are well connected and whether the controller is working properly. If there is a fault, it should be repaired or replaced in time.

Lubricate transmission parts: Regularly add lubricating oil to transmission chains, gears and other parts to reduce wear and extend service life.

3. Electrical system maintenance

Check electrical circuits: Regularly check whether electrical circuits are aging, short-circuited, etc. to ensure the safety and reliability of the electrical system.

Cut off power supply maintenance: When performing electrical maintenance, be sure to cut off the relevant power supply first, and hang maintenance and inspection signs in obvious locations to prevent accidents.

4. Special weather and situation handling

Ice and snow weather: On large ice and snow days, if there is severe ice inside the telescopic bollard pile, lifting operations should be prohibited. Heating and other methods can be used to thaw before use.

Continuous lifting: Prevent the telescopic bollards from rising and falling continuously. The rise and fall should not be switched continuously and quickly to avoid shortening the service life of the motor and hydraulic pump.

5. Comprehensive inspection and maintenance

Comprehensive inspection: Regularly conduct comprehensive inspections on the telescopic bollards, including the strength of the bollard, sealing performance, stability of the control system, etc. If there is a problem, it should be repaired or replaced in time.

Professional maintenance: It is recommended that professional technicians perform equipment maintenance and repairs to avoid private disassembly and modification of machine parts.

6. Recording and Tracking

Establish a recording system: Establish a recording system for the maintenance and maintenance of telescopic bollards, and record the time, content, replaced parts and other information of each maintenance and maintenance.

Track the operating status: Regularly track the operating status of the telescopic bollards to promptly discover and deal with potential problems.

In summary, the maintenance and maintenance of telescopic bollards involves many aspects, and it is necessary to comprehensively consider factors such as equipment characteristics, working environment and operators. By strengthening daily maintenance and regular inspection and maintenance, the incidence of equipment failure can be significantly reduced, and the efficiency and safety of use can be improved.