Flap barrier gate troubleshooting and repair

I. Common types of flap barrier gate faults

1. The flap cannot be opened or closed: This may be caused by motor failure, transmission component damage or control system failure.

2. The flap barrier gate is not sensitive: The flap barrier gate is slow to respond or does not respond when people pass through. It may be a sensor failure or line connection problem.

3. The flap barrier gate has abnormal noise: It is usually caused by wear, looseness or insufficient lubrication of mechanical parts.

II. Flap barrier gate troubleshooting and repair steps

1. Check the power supply and line: Ensure that the power supply of the flap barrier gate is normal, check whether the connection of each line is firm, and eliminate the fault caused by power supply or line problems.

2. Check the motor and transmission parts: For the failure of the flap to open or close, the motor and transmission parts should be checked. If damage is found, it needs to be replaced in time.

3. Check the sensor and control system: For the problem of insensitive sensing, check whether the sensor is clean and unobstructed, and check whether the control system is set correctly.

4. Maintain mechanical parts: For flap barrier gates that make abnormal noise, the mechanical parts should be cleaned, lubricated and tightened regularly to extend their service life and reduce the occurrence of failures.