0086-18218346058 ruperto@qiruisafe.com

Common faults and repairs of swing gate turnstiles

1. Swing gate turnstiles cannot move.

 

When the swing gate turnstile cannot move normally, you need to check the following aspects:

 

1. Is the power cord in normal contact?

2. Is the motor working normally?

3. Is the sensor sensitive?

 67b3feda83bb3.jpg

For different fault causes, the following repair measures can be taken:

 

1. Check whether the power cord is plugged in and connected normally. If it is loose, connect it in time.

2. Check whether the motor has any abnormality. If it is damaged, it needs to be replaced.

3. Check whether the sensor is working properly. If the contact is poor, it needs to be cleaned.

 

2. There is an abnormal sound in the swing gate turnstile.

 

After the swing gate turnstile has been used for a period of time, there will be an abnormal sound in the swing gate turnstile, which needs to be handled in time.

 

1. Check if the bearing is worn

2. Check if the swing rod and swing arm are locked firmly

3. Check if the gear transmission is normal

 

Corresponding solution:

 

1. Replace the worn bearing

2. Re-lock the swing rod and swing arm to ensure firmness

3. Apply or replace the lubricant required for gear transmission to ensure normal operation

 

3. Failure of the swing gate turnstile sensor.

 

Failure of the swing gate turnstile sensor will cause the gate machine to be unable to sense the passage of pedestrians, which needs to be handled in time.

 

1. Check if the sensor wiring is normal

2. Check if the sensor has water ingress

 

Corresponding solution:

 

1. Check if the sensor wiring is complete and repair the damaged parts.

2. Check if there is water ingress in the sensor circuit, and clean it in time to prevent circuit carbonization.

 

In short, the swing gate turnstile is an indispensable part of urban public facilities. If it fails, it will not only affect people's passage, but also increase the difficulty and cost of maintenance. The common faults and maintenance methods of the swing gate turnstile introduced above are intended to remind users to pay attention to the maintenance and care of the swing gate turnstile in daily use to ensure its normal operation.